Click on the image to check the artwork
By certification 
| Centilever CNC steel cutter | |
| 1.Smart design. | |
| 2.Electric height adjustment. | |
| 3.High precision. | |
| 4.Prompt shippment. | |
| Â Cantilever CNC steel cutter: | |
| This type of cutting machine for large cantilevered structure, transverse effective cutting width 2.8m, more than longitudinal section may need to configure the rail. Can be configured according to user requirements flame, plasma cutting mode, and optional to increase the system; are used linear guide, side drive. Â | |
| Cross Beam Length | 3.5m |
| Longitudinal Rail Length | 3.0m |
| Effective Cutting Width (X axis) | 2.8m |
| Effective Cutting Length (Y axis) | 2m |
| Cutting Mode | Flame only; Plasma only |
| Drive Mode | Single-side |
| Drive Method | Rack and pinion drive for X and Y axes |
| Flame Cutting Thickness | 6-200mm |
| Plasma Cutting Thickness | 1-60mm (according to the specification of plasma power source) |
| Cutting Speed | 0-3500mm per minute |
| Moving Precision | 0.01mm per step |
| Power Source | 220V 50Hz  500-1000W |
| Cutting Gas | Acetylene, Propane |
| Plasma Gas | Pressed air, Oxygen, N2 |
| Torch Height Controller | Electromotion bottom |
Â
