Click on the image to check the artwork
By certification 
FEATURES
1. Balanced seal
2. Single seal
3. Multiple springs rotating
4. PTFE wedge ring auxiliary sealing
Advantages
1. Normal mechanical seals for ideal sealing
2. High pressure operating conditions are agreeable.
3. PTFE ring for corrosion resistance.
4. Clean assembly
5. Long product lifecycle. Energy saving, environment protection
6. Installation faults are avoided, damage-free and cost-effective.
7. Excellent compensation performance functioning equivalent, effective pressurization
8. Straightforward and easier specification for pre-assembled unit. Time saving (reduced down-times)
9. Individual adaptation was subject to pump's design and style. Customized products (OEMs) are available.
10. Wide applicable to program about conversion and retrofit
Conditions and Operating range
1. Pressure: ≤5.0MPa
2. Temperature: -50° C~ 200° C
3. Shaft diameter: d=12.7 to 152.4mm
4. Rotation speed: n≤5000r/min
5. Applicable medium: Water, waste, oil and weak
corrosive fluid (medium), chemical
Materials
Metal parts: Metal 316, 304, 2Cr13 multiple Springs
Friction Elements: Silicon carbide or hard alloy,
Carbon graphite
Auxiliary seal: PTFE wedge ring
1. Balanced seal
2. Single seal
3. Multiple springs rotating
4. PTFE wedge ring auxiliary sealing
Advantages
1. Normal mechanical seals for ideal sealing
2. High pressure operating conditions are agreeable.
3. PTFE ring for corrosion resistance.
4. Clean assembly
5. Long product lifecycle. Energy saving, environment protection
6. Installation faults are avoided, damage-free and cost-effective.
7. Excellent compensation performance functioning equivalent, effective pressurization
8. Straightforward and easier specification for pre-assembled unit. Time saving (reduced down-times)
9. Individual adaptation was subject to pump's design and style. Customized products (OEMs) are available.
10. Wide applicable to program about conversion and retrofit
Conditions and Operating range
1. Pressure: ≤5.0MPa
2. Temperature: -50° C~ 200° C
3. Shaft diameter: d=12.7 to 152.4mm
4. Rotation speed: n≤5000r/min
5. Applicable medium: Water, waste, oil and weak
corrosive fluid (medium), chemical
Materials
Metal parts: Metal 316, 304, 2Cr13 multiple Springs
Friction Elements: Silicon carbide or hard alloy,
Carbon graphite
Auxiliary seal: PTFE wedge ring
