Hot search:
 

CO2 Laser Beauty Machine--Wrinkle Removal Skin Rejuvenation Skin Tightening Skin Lifting Scar Remova

Click on the image to check the artwork
unit price: negotiable
min amount:
amount:
period for delivery: Consignment Deadline Days
area: Beijing
Expiry date : Long Effective
last update: 2017-03-22 14:30
view count: 232
enquiry
Company Profile
 
 
Product details

Beijing OPT Laser is one of the largest OEM co2 laser beauty machine--Fractional CO2 Laser System fires a laser beam which is split into numbers of microscopic beams, producing tiny dot or fractional treatment zones within the selected target area only. The treatment tip can vaporize the outmost layers of the skin across a large surface by creating thousands of tiny, microscopic laser wounds, spaced in an even pattern across the skin, but leaving areas of healthy, untreated skin between them, the lower collagen layer of the dermis is stimulated to renew and repair.Therefore, the heat of laser only passes deeply through the fractional damaged area.Therefore, the heat of laser only passes deeply through the factional damaged area, the surface of skin now contains only microscopic surface wounds, in stead of a large, red, oozing burn. During the skin self-resurfacing, a great amount of collagen is produced for skin rejuvenation, after some recovery, the newly-generated skin is remarkably smoother, healthier. 


CO2 Fractional laser (CO-C1)

Machine Detail:

Principle

Co2 Laser is very useful in surgical procedures because water (which makes up most biological tissue) absorbs this frequency of light very well. Fractional resurfacing is a new modality for laser treatment that creates numerous microscopic thermal injury zones with controlled width, depth, and density that are surrounded by a reservoir of spared epidermal and dermal tissue, allowing for rapid repair of laser induced thermal injury. The CO2 Laser beauty equipment can be used in multiple specialties, such as Oral Surgery, Plastic Surgery, Dermatology. CO2 Fractional Laser System fires a laser beam which is split into numbers of microscopic beams, producing tiny dot or fractional treatment zones within the selected target area only. Therefore, the heat of laser only passes deeply through the fractional damaged area. This allows the skin to heal much faster than if the whole area was treated. During the skin self-resurfacing, a great amount of collagen is produced for skin rejuvenation, eventually the skin will look much healthier and younger. 

 

Advantages: 

1.The spots size is adjustable according to different treatment area.

2.Combine scanning and cutting features into one. 

3.Clear aiming beam to specify the treatment target.

4.Competitive price for different customers.

5.less bleeding, shorter surgery time, less risk of infection, and less post-op swelling. 


Treatment scope:

The CO2 Fractional Laser (10600nm) is indicated for use in dermatological procedures requiring ablation, resurfacing and coagulation of soft tissue.

Skin resurfacing (to improve texture), Skin rejuvenation, Skin revitalization

Pigmented lesions removal: age spots / brown spots / sun spots

Wrinkle removal :Around the eyes

Acne scars removal

Surgical scars removal

Melasma (mask of pregnancy)

Actinic Keratoses

Fractional Resurfacing


Technical specification: 

Wavelength

10.6μm

Power

30W

Transmission System

7-Ariculation Joint

Spring-Balanced Light Guiding Arm

Scanning Mode

Scanning area: min 0.1 ×0.1mm  max 20 ×20mm

Scanning graphic: Rectangular, Ellipse, Round, Triangle

Handle piece Velocity: 0.1~9cm²/s

Scan depth:<2mm

Estimated power:24mJ~1000J

Continuous

1~30W,step adjustable per 1W

Indication beam

Diode laser (532nm,5mW)

Micro Pulse Energy

5MJ ~ 100 MJ

Pulse Interval time

1~999ms, step adjustable per 1 ms

Pulse duration

90~1000μs

Modulation Frequency

1~999Hz, step adjustable per 1 Hz

Cooling System

Built-in water cooling

Electrical requirement

230VAC  50Hz  1000W

Dimension(W×D×H)

480mm×59mm×130mm

Weight

65kg


Package & Delivery

Packaging Details:

bulk in Air box / upon request


 



Delivery Detail:


Loading port:


normally 7 -10 working days after order confirmed and deposit received


FOB Beijing/Tianjin


CE Certificates

 CCQS


 

             

Our Services

1. Guarantee: laser tube---1 year, 

                     Other parts ---2 year 

                     Whole life to supply the maintenance;

2. Any inquiries or recommends will try to give the reply within 24hours.

3. Provide OEM and ODM services. We can customize the software and case logo.

Total0bar [View All]  Related Comments
 
More>other products

[ ProductsSearch ]  [ Send Fav ]  [ Share ]  [ Print ]  [ Send Report ]  [ Close ]

 
Home | Products | Suppliers | News | Tradeshow | Sitemap | Message | RSS Feed