JIS Automotive Battery

JIS Automotive battery NS40Z / 36B20R / N36 truck battery, high quality with super low prices, with UL, CE, SONCAP, TUV certificates 12 months warranty.

Model No.: N36 Voltage: 12V Capacity: 36AH/20Hr

Dimension (L*W*H*TH): 195*127*200*220 mm

Reserved capacity: 55 min

CCA (-18℃): 285A

Lay out

Terminal

Characteristic

1. Dry charged lead acid car battery, JIS standard car battery / truck battery

2. Low self-discharge

3. Excellent cold temperature resistance

4. Extreme charge & discharge performance

5. Unique design to give perfect vibration resistance

6. Super cold cranking capacity, high cranking amperage

7. Super strong grid plate and patent alloy for better life under high temperature.

Applications

1. Starting, light and ignition for car, tractor, Mine vehicle and mobile machinery shop.

2. Starting and ignition for the diesel motor or gasoline motor.

3. It can be used as power for car, tractor, Mine vehicle and mobile machinery shop.

4. As a storage battery for home solar systems, especially in Africa market.

5. Backup power for solar water pump.

Related Products

The things you need to consider when buying a new FIRSTEK car/auto battery.

The life span of most car batteries is only 2-4 years, which depends on driving habits and environmental conditions. What should we consider when buying new batteries? The following suggestions:

1. There are different standards and groups of battery size car batteries. For example, they are divided into JIS, DIN, BCI standards, and different groups, which indicate the size of the battery. You should check the owner's manual or consult your mechanic to find the right battery size, which is completely suitable for the battery tray to prevent damage and vibration during driving.

2. Battery freshness, there is a serial number on the FIRSTEK battery, indicating the freshness of the battery. Consult your mechanic for letters and numbers. We should try not to buy batteries more than six months from the date of production.

3. Reserve capacity, refers to the time when the battery runs on its own energy before discharging without an engine. There is a high reserve capacity to help cars pass through difficult situations such as incompatible engines, alternator failures and accidentally left lights.

4. Power requirements, this refers to the cold starting current (CCA) and starting current (CA). The starting amperage is the energy required to start a vehicle at 32 degrees Fahrenheit, while the cold-starting amperage is the battery's ability to start a vehicle at 0 degrees Fahrenheit. CCA is suitable for cold climates and higher CCA batteries are recommended.

5. There are two types of FIRSTEK car/car battery maintenance: dry charging and maintenance-free. The maintenance-free FIRSTEK battery is sealed, and the sulfuric acid electrolyte can operate for the entire battery life without maintenance. The dry charged FIRSTEK car/car battery is sealed with a hood and occasionally requires the addition of distilled water.

6. It's important to make sure you consider your new car/car battery warranty. FIRSTEK offers a 2-year warranty for maintenance-free vehicles/vehicle batteries and a 1-year warranty for dry rechargeable vehicles/vehicle batteries. The warranty period is calculated from the date of purchase.

7. FIRSTEK car/car battery has different types of terminals that are in different positions. For more information, see technical specifications. The position of the positive terminal affects the polarity of the vehicle. If the positive terminal is in contact with the metal shell of the vehicle, there is a risk of short circuit. Therefore, depending on the vehicle type, it is important to check which side the positive terminal is on, whether it is on the right or left.

8. Capacity (AH) capacity refers to the time it takes to discharge electricity, and refers to the amount of electricity (capacity) the battery can store. A higher Ah means the battery can hold its load for a long time, so it is less likely to run out. You can check the capacity of the old battery label and compare it with the capacity of the new battery.

9. Battery life you can check the battery life of the current battery at the auto parts shop, 4S shop or battery expert. This will help you know if you need a new battery or just a maintenance program.

10. Before you buy a battery, consider the type of battery you have used before. A battery that serves you for a long time without problems is desirable and you can always compare this experience with a friend.

Car Battery Common Faults

1. Battery power loss

The power loss test results of common faults of automobile battery show that the battery needs to be charged in a good state.

1) The fault phenomenon is that it is very difficult for the automobile to start, and the light is also very weak.

2) The CCA of the detected battery is far lower than the standard value.

3) The voltage detection is in a state of power loss without charging.

2. The failure reason

1) The output voltage of the automobile generator is lower than the normal range (13.8-14.4v)

2) The electrical power is greater than the output power of the generator.

3) The static leakage and leakage current of the vehicle are large.

4) The connector is corroded or the harness is aged, resulting in excessive voltage drop when starting.

5) The storage time is too long or the storage temperature is too high.

6) The electrical equipment is overused when driving

3. Methods to prevent and handle faults

1) Charge the deep battery with small current outside the vehicle.

2) Detect vehicle and battery related equipment, solve leakage and charger problems.

3) Check the connection between the harness and the end post frequently, keep it clean, dry and firmly connected.

4) Form a good habit of using the car and avoid using too much power when the engine is not running.

Battery failure - test result is battery replacement

1. Fault phenomenon

1) it is difficult or unable to start the vehicle

2) the test result of the tester is to replace the battery

2. The failure reason

1) Battery life is too long.

2) The battery is often deeply discharged (vehicle leakage or improper operation, such as forgetting to turn off vehicle electrical appliances at night, watching vehicle DVD, etc.) and is not charged in time.

3) The battery storage time is too long or the vehicle with full load battery is stored for a long time, resulting in large power loss, irregular charging and maintenance, and internal board vulcanization.

4) The battery is over flushed, the battery is used with high strength, and the high use environment causes the battery to lose water, and the active material of the plate falls off and corrodes.

5) Improper battery adaptation leads to "small horse pulling big car".

3. The connection of the metal parts inside the defective battery is badly welded or badly welded (in general, the battery cannot be started when loading, or cannot be used for about three months in normal use).

4. It is suggested to replace the battery.

Battery Short Circuit

Battery short circuit - the test result is not good, the battery must be replaced.

1. Fault phenomenon

1) The vehicle cannot start, and the battery is disconnected according to the test results of the tester.

2) The open circuit voltage of the battery is usually 10V or decreases with 2V, and the CCA value is close to 0

2. Causes of failure

1) Short circuit of battery board growth

2) Deep discharge of battery frequently (vehicle leakage or improper operation, such as forgetting to turn off vehicle electrical appliances at night, watching vehicle DVD, etc.) and not charging in time.

3) The battery storage time is too long or the vehicle with full load battery is stored for a long time, resulting in large power loss, irregular charging and maintenance, and internal board vulcanization.

4) The battery is over flushed, the battery is used with high strength, and the high use environment causes the battery to lose water, and the active material of the plate falls off and corrodes.

◆ The connection parts of the internal metal parts of the manufacturing defective battery are poorly welded or poorly welded (generally, the battery cannot be started when the battery is installed or can not be used for about 3 months in the normal use process).

3. Solutions

It is recommended to replace the battery.

Battery cannot be detected

1. Fault phenomenon

the vehicle can not start, the detection result of the detector shows error, need to swing clamp.

2. Cause of failure

1) Application defect: battery is not suitable for overcharging. The battery is used in high strength and high environment. The single conductor in the battery corroded off, resulting in the battery circuit disconnected.

2) Manufacturing defects: defective welding or failure of the connection part of each single battery inside the battery (in general, the battery cannot be started when loaded and cannot be used in normal use for about three months).

3. It is suggested to replace the battery

http://www.firstekbattery.com/